How to Dissolve Polyacrylamide Powder Correctly?
2025-09-19
Polyacrylamide powder is widely applied in water treatment, oilfield operations, and industrial processing. To ensure the best performance, it is important to understand how to dissolve polyacrylamide powder correctly. Improper handling often reduces the efficiency of the solution and leads to waste. Based on our professional experience, we will share the correct methods, introduce our oilfield chemical solutions, and provide detailed product parameters for reference. As a trusted brand, Nuoer and Nuoer Energy are committed to helping clients achieve consistent performance in their daily operations.
Why dissolving polyacrylamide correctly matters
When preparing polyacrylamide solutions, the correct dissolution procedure is essential to avoid problems such as clumping, incomplete hydration, and reduced viscosity. Our factory has seen many cases where incorrect mixing techniques resulted in poor performance in oilfield operations. By following standardized methods, users can maximize the effectiveness of this Oilfield Chemical and reduce operating costs. This is why knowing how to dissolve polyacrylamide powder correctly is not just a technical detail but a critical step in the entire process.
Product parameters of our polyacrylamide
Our factory produces a wide range of polyacrylamide powders suitable for water treatment and oilfield applications. To give you a clear understanding, below is a technical table presenting the key specifications of our product. These parameters are carefully tested to ensure the reliability of Nuoer Energy solutions.
| Parameter | Specification |
| Appearance | White granular powder |
| Molecular Weight | 5-25 million |
| Degree of Hydrolysis | 10% - 40% |
| Solid Content | ≥ 88% |
| Dissolution Time | ≤ 60 minutes |
| Application Fields | Water treatment, oilfield chemical, mining, paper making |
Step-by-step guide: How to dissolve polyacrylamide powder correctly
Our team at Nuoer Energy recommends the following method to prepare a stable solution of polyacrylamide powder:
2. Start the mixer at a moderate speed, around 200-300 rpm, to create a steady vortex.
3. Slowly add the polyacrylamide powder into the vortex. Ensure the feeding rate is controlled to prevent clumping.
4. Continue stirring for 30-60 minutes until the solution becomes clear and uniform.
5. Allow the solution to rest for 1-2 hours before application to ensure complete hydration.
By following these steps, our clients ensure maximum performance of this Oilfield Chemical in their operations. Our factory has optimized these guidelines to help customers achieve consistent and reliable results.
Frequently Asked Questions about how to dissolve polyacrylamide powder correctly
Q1: How to dissolve polyacrylamide powder correctly for water treatment applications?
A1: For water treatment, prepare the solution at a concentration of 0.1% to 0.5%. Use clean tap water at room temperature, stir gently, and avoid adding the powder too quickly. This ensures the solution is uniform and ready for use in sedimentation and clarification processes. Our approach at Nuoer Energy ensures minimal product waste and consistent treatment efficiency.
Q2: How to dissolve polyacrylamide powder correctly in oilfield operations?
A2: In oilfield operations, it is recommended to use soft water or treated water to avoid unwanted reactions with minerals. Slowly add the powder into the vortex created by the mixer and maintain moderate stirring. The solution should be prepared at a concentration of 0.2% to 0.5%. Our factory has proven that this method increases viscosity stability, ensuring reliable Oilfield Chemical performance.
Q3: How to dissolve polyacrylamide powder correctly without clumping?
A3: To avoid clumping, always add the powder slowly and evenly into the vortex of moving water. Ensure the stirring speed is not too high, as this may shear the polymer chains. Allow sufficient hydration time before use. Our technical team at Nuoer Energy has developed feeding systems that optimize this process for industrial-scale applications, guaranteeing smooth dissolution every time.
Why Choose Us?
Knowing how to dissolve polyacrylamide powder correctly is vital for achieving efficiency in both water treatment and oilfield operations. Our factory has long experience in producing high-quality polyacrylamide and oilfield chemical products, trusted by clients worldwide. With the expertise of Nuoer and the support of Nuoer Energy, customers can rely on professional guidance and guaranteed performance. By following the correct procedure and avoiding common mistakes, users can ensure maximum efficiency and cost-effectiveness in every application.
