Home > Products > Adhesive > Environmental Rapid Clear Epoxy Resin Glue
Environmental Rapid Clear Epoxy Resin Glue
  • Environmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin Glue
  • Environmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin Glue
  • Environmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin Glue
  • Environmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin Glue

Environmental Rapid Clear Epoxy Resin Glue

Environmental Rapid Clear Epoxy Resin GlueMPA104cking Specification: 56g/set, 12sets/inner, 12inners/ctnCarton Measure: 41.5*29*48.7cmDescription:Feature:8 Minutes Rapid Clear Epoxy Adhesive have the features of:(1) solidifying within 5-8 minutes,(2) can be used after four hours(3) quick set and hig......

Send Inquiry

Product Description

Environmental Rapid Clear Epoxy Resin GlueMPA104
cking Specification: 56g/set, 12sets/inner, 12inners/ctn
Carton Measure: 41.5*29*48.7cm
Environmental Rapid Clear Epoxy Resin Glue
Description:
Feature:
8 Minutes Rapid Clear Epoxy Adhesive have the features of:
(1) solidifying within 5-8 minutes,
(2) can be used after four hours
(3) quick set and high adhesive performance
(4) can be lacquered and waxed
Main Component:
A component is the modified Epoxy Resin and mucus, B component is modified amine solidify and mucus.
The products of this series are widely used for bonding iron, casting iron, steel, aluminum, glass, pottery, graphite, concrete etc. Mainly used in the joint, the seal and patching of architecture material, the automobile spare part, the electronic component assembly, the gem jade carving, the handicraft and so on.
Environmental Rapid Clear Epoxy Resin Glue
Using Method:
1. The surface should be clean and dry, without oil or wax
2. Take down the cap, pierce the seal, squeeze out evenly (A: B=1: 1). Cover the surface with glue based on the mixing of the two components evenly,
3. Press it according to the actual condition...It could achieve the using intensity after the solidifying for four hours during the normal temperature, it is suggested to operate at above 10º C.
Environmental Rapid Clear Epoxy Resin Glue
Warning:
1. It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess too much.
2. Tighten the caps after usage. Do not mix the cap of part A and B.
3. Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4. Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.
5. Take strict precautions against touching by the kids and entering into the mouth.
Storage And Packing:
1. Stock the products with air-tight seal in the environment of shade and dry. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2. Preserve and transport as non dangerous products.
3. Packing specification: 56g/card, in tube.
Environmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin GlueEnvironmental Rapid Clear Epoxy Resin Glue

Related Category

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
Click Refresh verification code

Leave Your Message

  • Click Refresh verification code