Product Description

Epoxy Metallic Self Levelling Resin Flooring Pearl

Solid Color Epoxy Floor Coating System is a high build,Self Leveling ,clear or pigmented resinous flooring system engineered for industrial applications.This system withstands high impact environments, providing chemical and abrasion resistance.
Epoxy Metallic Self Levelling Resin Flooring Pearl

MTB-3327 Clear Epoxy Primer/Base Coat (A:B=2:1)

MTB-3328 Clear Clear Epoxy Middle Coat (A:B=2:1)

MTB-3329 High Gloss Epoxy Top Coat (A:B=2:1

Item (MTB-3327/28/29)	Epoxy Resin(A )	Epoxy Resin(B )
Color	Transparent Liquid	Transparent Liquid
Viscosity@25ºC(mpa.s)	380-450	30-40
Mix Ratio(by weight)	2	1
Hardness(Shored)	75-80
Operation time(100g mixed glue ,25ºC)	50-60minutes
Curing Time(25ºC)	24-26hours
Curing Time(35ºC)	8hours
Curing Time(25ºC)	6-12months

Product Advantage

* Non-toxic
* 100% Solid
* VOc Free
* Solvent Free
* Crystal Clear
* Epoxy Resin and hardener,mix ratio of 2:1
* Thick Pour to 2"-4"

4.FDA Grade &MSDS
To consider a product food safe, the end product must be tested. Since every project is made by a different artisan and not in the same exact way, and our product comes in two parts that must be mixed, every finished piece must be tested. Once Super Clear Table Top Epoxy has cured, it becomes safe, per FDA code, 21CFR175.300 which states "Resinous and polymeric coatings may be safely used as the food contact surface of articles intended for use in producing, manufacturing,packing, processing, preparing, treating, packaging, transporting, or holding food" and can be used as a "functional barrier between the food and the substrate" and "intended for repeated food-contact and use."
Epoxy Metallic Self Levelling Resin Flooring Pearl

Applications
Warehouses ,Manufacturing areas ,Laboratories &Clean rooms,Automobile service areas &garages,Exhibition halls,Medical & educational facilities,Aircraft hangars,Airplane Hangers,Hospital ,Distribution centers,Laboratories ,Parking decks.

Operation of 3D Epoxy Floor

For the whole process ,you will need: MTB-3327 Epoxy Primer +3D images+MTB3329 Top Coat ,the using process,pls referts to below diagram and the tips.If you want to have an enhanced effect you can apply a base undercoat, it is MTB-3328

Packing &Shipping

Neutral Package

----5kgs/barrlel, 15kgs/kit
----20kgs/barrel, 60kgs/kit
----1gallon/barrel, 3 gallons/kit.

Accept package and label OEM&ODM

Company

FAQ

1.Q: What's the best way to mix this?

A: You'll want to make sure that you have 2 parts base resin and 1 part curing agent measured precisely, by volume. Pour each into your mixing bucket, and we recommend mixing by hand for at least 3 minutes and between 3-5 minutes or until it is fully mixed. Be careful to scrape the

sides while mixing, but when pouring, do not scrape the sides. This can impart unmixed material that may cling to the side and has not been incorporated. Don't worry about any bubbles in the mixture, they will all work themselves out.

2.Q: How long does it take to cure, and what temperatures can I pourthis in?

A: Our optimum environment temperature range is 72° - 84°F (in a clean, temperature controlled environment. In that temperature range, it will begin to gel in 20-30 minutes, and cure rock hard within 24 hours.Temperatures under 70° will slow the curing process even more, and the closer you get to 60° the curing process will stop. Above 85°, it will begin to accelerate curing, leading to cracking, shrinking and other negative results.

3.Q: Is your epoxy FDA Compliant?

A: The short answer is, yes. Once our epoxy has cured, it becomes safe,per FDA code, 21CFR175.300 which states "Resinous and polymeric coatings may be safely used as the food-contact surface of articlesintended for use in producing, manufacturing, packing, processing,

preparing, treating, packaging, transporting, or holding food" and can be used as a "functional barrier between the food and the substrate".

4.When Can I Demould?

A: Our optimum environment temperature range is 72° - 84°F in a clean temperature controlled environment. In that temperature range, you can demould between 18 and 24 hours, and its optimal workability will be at 24-30 hours. At 30 hours it will sand and plane as easy as wood!